Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
58
5.8.2.2
Line-Crossing Detection
When objects (people, vehicle or other objects) cross a pre-defined line, the Line-Crossing Detection event will
be triggered. You can configure some event actions like event recording, alarm output or Email alert when an
event is triggered.
Pedestrian Detection
Face Detection
Cross Counting
Object Detection
Perimeter Intrusion
Line-Crossing
Analysis
Switch:
Switch the button to the right to enable the function.
Timeout Duration:
After enabling the Alarm Out, select a timeout duration for the alarm output.
Post Recording:
Select a post recording time when a Line-Crossing event is triggered.
Sensitivity:
Select a sensitivity for the Line-Crossing Detection. The larger the value, the higher the sensitivity.
Scene:
Select
Indoor
or
Outdoor
based on the location where your IP camera is installed.
Alarm Out:
Switch the button to the right to enable the alarm output, and then further configure the
Timeout
Duration
above.
Send Email:
Switch the button to the right to enable the Email alert function. When a Line-Crossing event is
triggered, the camera will send an email alert with a snapshot image to the pre-configured Email receiver. Note
that for this function to work, you have to set up the Email function in advance (refer to
5
.
5.3 Email
).
Rule Number:
Select a number to configure the areas. Up to 4 areas can be configured.
Rule Switch:
Switch the button to the right to enable the Rule Type setup below.
Rule Type:
Select a rule type.
Enable Recording:
Switch the button to the right to enable the Line-Crossing Detection recording function. Note
that for Line-Crossing Detection recording function to work, the Record Schedule function has to be configured
(please refer to
5.8.1 Record Schedule
).
Click
Refresh
to refresh the page; click
Apply
to save the settings.
