Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
45
【
NTP Settings
】
Select NTP and then configure the below settings. The NTP (Network Time Protocol) function
allows your IP camera to automatically sync its clock with a time server. This gives it the ability to constantly
have an accurate time setting (your IP camera will periodically sync automatically).
Enable NTP:
Switch the button to the right to enable the NTP function. When NTP function is enabled, the
system will calibrate the system time at 00:07:50 daily and every time when the system is started up.
Server Address:
Select a NTP server.
Time Zone:
Select a time zone of your region.
【
Synchronize
】
Select Synchronize to synchronize the time with your PC.
Click
Refresh
to refresh the page; click
Apply
to save the settings.
