EverFocus EDSR400H, Инструкция по эксплуатации

Страница: 24 / 107

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
20
ƒ
High : 31KB
ƒ Superior : 35KB
To change this, simply use the arrow keys on the DVR which also
represent the channel 1-4 keys (These are the top four buttons). Use the
up and down arrow keys to make your selection.
¾
Disk Full: This field represents what to do when the Hard Disk Drive gets
full. In this case the default is set to Rewrite. The other option if you wish
to do so is to set the disk full option to Stop. This will stop all recording
once the drive has been filled up. You would then have to go to System
Setting Menu and do a Disk Renew in order to format the drive and start
recording again. To change this, simply use the arrow keys on the DVR
which also represent the channel 1-4 keys (These are the top four buttons).
Use the up and down arrow keys to make your selection.
: Press or to move the cursor to the left or right.
: Press or to change the value.
These keys are located at the top left row of keys (same keys
as channel 1-4).