1
WWW.EVERETIMAGING.COM
CONTENT
Dial Switch Settings (at the bottom of the camera)
SAFETY GUIDES
1.
Before operation, please fully read and follow all instructions in the manual.
2.
The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
3.
The camera power voltage is DC12V/8W. We suggest you use it with the original power
supply adapter or use PoE+ (IEEE802.3at) compatible switch.
4.
Please keep the power cable, video cable and control cable in a safe place. Protect all
cables especially the connectors.
5.
Operational environment: 0
℃
-50
℃
, humidity less than 90%.To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
6.
Avoid stress, vibration and damp during transportation, storage and installation.
7.
Do not detatch the camera housing and cover. For any service, please contact authorized
Everet technicians.
8.
Video cable and control cable should be individually shielded, and cannot be substituted
with other cables.
9.
Do not direct the camera lens towards strong light, such as the sun or the intensive light.
