Page | ii
AP1004WRe Installation Guide
Safety Warnings
The AP1004WRi Wireless Access Point installation must be performed by certified technicians only and
in compliance with all local/state/federal safety requirements. All warnings and information in this
manual should be read and understood before proceeding with installation. Any noncompliance by the
user voids the warranty of the product.
General Safety
You can be killed or injured if performing antenna installation near electrical power lines.
Carefully read and follow all instructions in this guide. Ensure that there are no high voltage or
electrical fields nearby.
Working Aloft Warning
When working on tower or roof, individuals must wear safety belts. Tools must be tied to the
individual using them. Workers below must wear safety helmets.
Lightning Activity Warning
Make sure not to connect or disconnect cables during periods of lightning activity. A surge
protective device should be installed to prevent potential damage from very high surges, for
instance, the peak surges caused by lightning.
Explosive Device Proximity Warning
Do not operate network devices close to explosive merchandise or in explosive environments,
for example, in the vicinity of a gas station.
Antenna Placement Warning
Do not install any antenna near overhead power lines or other electric light, or where the
antenna can come into contact with such circuits.
Grounding Warning
Protect your AP1004WRi Wireless Access Point by installation of grounding lines. The ground
connection must be complete before connecting power to the AP1004WRi Wireless Access
Point enclosure. The requirement of grounding is to make sure the resistance is less than
5 ohm between the ground termination point to grounding tier.
Power Installation Warning
The installation of the power switch must be performed by a certified technician. The power
switch is not supplied with the AP1004WRi Wireless Access Point. The power cord must be
assembled by a certified technician, and the final assembly must comply with related
requirements.
Solar Irradiation and High Temperature Protection
Pay attention to the level of sunlight, which can increase the working temperature of the
AP1004WRi Wireless Access Point to higher than specifications allow.
