Page | 7
AP1004WRe Installation Guide
4.
The AP1004WRi is manufactured with a generic country code. During the discovery phase of the
AP1004WRi, the Access Controller verifies the country code of the AP1004WRi before allowing it to
join the network.
•
If the country code registered in the non-volatile memory of the AP1004WRi and the country code
locked into the Access Controller software match, the AP1004WRi is allowed to join the network.
•
If an AP1004WRi is detected with a generic country code, the Access Controller registers the
AP1004WRi by overwriting the generic country code with the locked country code from the
BaseCamp configuration. After updating the country code, the AP1004WRi is automatically
rebooted allowing it to join the network.
•
If the AP1004WRi is set with a different country code, the AP1004WRi is quarantined and not
allowed to join the network.
5.
The only mode of operation for the AP1004WRi is
Indoor
. The BaseCamp GUI restricts reconfigure the
mode of operation.
The transmitters on the radio modules in the AP1004WRi are disabled when the
country code is in generic state, or when the AP1004WRi is quarantined.
