EJ_3F012-3F013-3F014-INS-LAB-RevD20 • Traveler L3 Plus User Manual
7
UNFOLDING THE WHEELCHAIR
1. Engage wheel locks on both sides.
2. Use both hands to push down with even pressure on seat tubes and seat upholstery on insides
of wheelchair, as shown at above left, until the seat rails are fully seated, as shown at above
right.
Do not place any fingers or parts of your hand under the seat rails.
3. Attach footrests or legrests to wheelchair.
4. Reinstall seat cushion, if so equipped.
WARNING: Ensure seat, arms, and footrests or legrests are locked in place before
occupying or operating wheelchair.
FOLDING THE WHEELCHAIR
1. Detach footrests or legrests from wheelchair.
2. Remove seat cushion, if applicable.
3. Grab the seat upholstery at center front and rear with both hands, pull sharply, and lift up as
shown above.
4. If necessary, fold the excess seat upholstery over the arm.
