EJ_3F012-3F013-3F014-INS-LAB-RevD20 • Traveler L3 Plus User Manual
13
5 ADJUSTMENTS
The Traveler L3 Plus offers several adjustments to make it easier and more comfortable to drive.
Section 7, MAINTENANCE, offers preventive maintenance suggestions for keeping your wheelchair
in excellent condition; ensure that all components are in excellent condition before adjusting. The
following are recommended methods; after a few adjustments, you may develop your own. Always
consult your GF authorized distributor for assistance.
The person performing adjustments on the Traveler L3 Plus has the responsibility of making
certain that the user can safely operate the wheelchair with the adjustments selected. This
person must evaluate the user's ability, weight, physical condition, the environment in which the
wheelchair will be used, and the terrain over which the wheelchair will travel.
All adjustments and their page locations are referenced in the index at the end of this manual.
Specific tools needed to perform each adjustment are identified in adjustment directions. A
complete list of tools needed to perform all adjustments in this section follows:
Phillips screwdriver
Two
5
/
8
" wrenches
M13 wrench
M11 wrench
M6 hex key
REAR WHEELS, CASTERS, AND ANTI-TIPPERS
Rear wheels, casters, and anti-tippers are grouped because rear axle mounting position determines
caster axle mounting position and anti-tipper adjustment height. Using the correct combination of
rear axle and caster mounting positions maintains the correct alignment of the wheelchair.
We recommend that you do not replace or adjust rear wheel, caster, or anti-tipper components
yourself, since special tools and training are required. Contact your GF authorized distributor
when your rear wheels or casters need adjustment.
