EJ_3F012-3F013-3F014-INS-LAB-RevD20 • Traveler L3 Plus User Manual
14
ARMS
ARM—FIXED-HEIGHT, REMOVABLE, FLIP-BACK
Remove arm
The fixed-height flip-back arm is removable.
1. Depress both front and rear lower arm release pins until they unlock.
2. Hold arm by center of armpad. Lift straight up and off.
Install arm
Hold arm by center of armpad. Lower arm straight down into sockets
and push to lock. Ensure release pins are locked in place.
WARNING: Ensure arm is locked into place before occupying or operating wheelchair.
Flip arm back
1. Depress locking pin and lift front of arm up out of socket.
2. Swing arm up and back.
Lock arm
Push front of arm down into socket until it locks into place.
WARNING: Ensure arm is locked in place before occupying or operating wheelchair.
ARM—ADJUSTABLE-HEIGHT, FLIP-BACK (OPTIONAL)
Adjust arm height
If your Traveler L3 Plus arm is equipped with an upper arm release as
shown at right, your arm height is adjustable. Arm height is adjusted by
engaging the upper arm release in one of several predrilled holes. To adjust:
1. Pull upper arm release until it unlocks, freeing upper arm to move up
and down. To keep in unlocked position while adjusting arm height,
turn the release knob 90 degrees.
2. Holding upper arm by center of armpad, slide upper arm up or down
to desired height. Ensure both front and back of armpad are at the
same height.
3. Rotate release knob back to former position and ensure it locks into one of the adjustment
holes. To ensure upper arm is securely locked, move arm up and down; if no movement occurs,
arm is properly locked into place; if not, readjust until locked.
WARNING: Ensure upper arm is locked into place in level position before occupying or
operating wheelchair.
Flip arm back
1. Press bottom of latch, shown at right, against arm and lift front of
arm up out of socket.
2. Swing arm up and back.
Lock arm
Push front of arm down into socket until it locks into place.
WARNING: Ensure arm is locked into place before occupying or
operating wheelchair.
flip arm back
arm
socket
arm
arm
release
pin
adjust arm height
upper
arm
upper
arm
release
armpad
flip arm back
latch
arm
