GF0600055RevA06, October 006
Everest Lite Owner's Manual
REGuLAR BAttERy MAIntEnAnCE
WARNING: Batteries can supply a large amount of current. Do not wear jewelry or
watches when working on batteries. Take care not to connect the termi-
nals accidentally with anything metal; severe burns could result.
WARNING: Batteries contain sulfuric acid, which can burn eyes, skin, clothes, etc.
Use caution! Always wear safety glasses when working with batteries. If
contact occurs, flush immediately with water and get medical attention.
Clean batteries
Needed: baking soda
1. You will first need to remove the batteries; see Remove batteries in previous REMOVE
AND INSTALL BATTERIES section—follow steps 1-7.
2. Clean outside of batteries, and inside and outside of battery box, with a solution of
one tablespoon baking soda to ten ounces water.
3. Rinse with clear water. Allow to dry.
4. Ensure that batteries and connectors are clean and dry. Reinstall batteries; see Install
batteries in previous REMOVE AND INSTALL BATTERIES section—follow steps 1-10.
Clean battery terminals
Tools needed: wire brush or battery terminal cleaning tool
1. You will first need to remove the batteries; see Remove batteries in previous REMOVE
AND INSTALL BATTERIES section—follow steps 1-7.
2. Clean all battery terminals and clamps with a wire brush or battery terminal cleaning
tool (this can be purchased at most auto parts stores).
3. Reinstall batteries; see Install batteries in previous REMOVE AND INSTALL BATTER-
IES section—follow steps 1-10.
