39
Everest Lite Owner's Manual
GF0600055RevA06, October 006
X tRAnspORtInG tHE EVEREst LItE
WARNING: This wheelchair does not offer seating or occupant restraint equivalent
to the seat provided in a motor vehicle! To increase your safety while
traveling in a motor vehicle, always transfer to the vehicle seat and use
the restraint provided by the vehicle manufacturer.
The unoccupied Everest Lite can be disassembled into four pieces for transport (seat,
battery pack, rear base, and front base).
1. Engage the drive wheels (with the drive engagement
levers) and turn wheelchair power off.
2. Disconnect the hand control connector from the cowl
connector, as shown at right.
3. Pull the seat rotation lever while lifting the seat up and
off the base to remove it, as shown at right.
4. Remove the battery pack, as shown at right.
5. Set rear of wheelchair carefully on floor, as shown at
right. Pull lever to separate front from rear, being careful
not to drop wheelchair.
6. Fold the front base down, as shown at right, to separate
the front base from from the rear base.
