6
GF0600055RevA06, October 006
Everest Lite Owner's Manual
REMOVE And InstALL BAttERIEs
WARNING: Batteries can supply a large amount of current. Do not wear jewelry or
watches when working on batteries. Take care not to connect the termi-
nals accidentally with anything metal; severe burns could result.
Remove batteries
Tools needed: Phillips screwdriver
You will first remove the seat, and then the battery pack.
WARNING: Ensure that wheelchair power is off before removing batteries.
1. Engage the drive wheels (with the drive engagement
levers) and turn wheelchair power off.
2. Disconnect the hand control connector from the cowl
connector, as shown at right.
3. Pull the seat rotation lever while lifting the seat up and
off the base to remove it, as shown at right.
4. Remove the battery pack, as shown at right, and turn it
upside down (with handle/strap on bottom).
5. Use a Phillips screwdriver to open the battery pack, as
shown at right.
6. Disconnect the cables from the four battery terminals, as
shown at right.
7. Remove the batteries from the battery pack.
