DESIGNED TO PERFECTION
SETTING THE CURRENT TIME:
When not in use to set up timer functions, the oven timer display shows the time. Setting the clock correctly is
critical when using any of the automatic timer functions. The display is a 24 hour clock (12.00 is 12 noon).
Press the
button and the
button simultaneously. The minute digits will start flashing.
Use the
and
buttons to adjust the minute setting and press
to swap to hours.
Use the
and
buttons to adjust the hours setting and press
to finish.
NOTE: An internal battery will hold the clock time for up to 48 hours without power, after which the clock will
need to be reset.
SETTING THE ALARM FUNCTION:
Press the
button three times and the
symbol will light up in the display.
Press the
button to confirm that this is the correct timer function. The minute digits will start flashing.
Use the
and
buttons to adjust the minute setting from 1 to 99 and press
to finish.
The timer will start in 10 seconds. As the alarm timer counts down from the preset value, the display will
show the time until the alarm sounds, and the percentage of the time left to go.
When the time set has been reached, an auditable “beep” will sound for 60 seconds (unless a button is
pressed).
To stop the alarm before the set time, press the
button for 2 seconds.
MANUAL COOKING:
For general cooking purposes, without using any timer, manual mode should be used.
Press the
button once and the
symbol will light up in the display.
Press the
button and the oven will turn on (the display will show the word “cooking”). Set the
temperature and oven function as required. Oven functions and temperature settings can be adjusted at any
time (to stop cooking but keep the oven lamp on, set both to “0”).
To stop the oven, press the
button. The lamp will turn off and the display will only show the clock time.
Turn the temperature and oven function controls to “0”.
USING THE TIMER TO SET COOKING TIME:
For instances where the cooking needs to be started immediately, and stopped after a period of time, this
timer function should be used.
Set the temperature and oven function as required.
Press the
button twice and the
symbol will light up in the display.
Press the
button to confirm that this is the correct timer function. The minute digits will start flashing.
Use the
and
buttons to adjust the minute setting and press
to swap to hours.
Use the
and
buttons to adjust the hours setting and press
to finish.
The oven will turn on (the display will show the word “cooking”) after 10 seconds. The percentage of cooking
time left will be displayed (this will adjust as time goes by).
When the set time has expired, the oven will turn off & an auditable “beep” will sound for 60 seconds (unless
a button is pressed). Turn the temperature and oven function controls to “0”.
Oven functions and temperature settings can be adjusted at any time (to stop cooking but keep the oven
lamp on, set both to “0”).
To stop the oven before the set time, press the
button for 2 seconds. The lamp will turn off and the
display will only show the clock time.
10
