background image

 2
 

Table of Contents

Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety Information

PRECAUTIONS

1.  This document serves only as an installation guide. Refer to 

your state and/or local plumbing or onsite wastewater treatment 
and disposal regulations for details pertaining to your system’s 
design, installation and maintenance requirements.

2.  Keep this instruction manual in a safe place for future reference.
3.  This product is for use with residential sump pumps only with a 

maximum 12 psi.

4.  A factory-drilled weep hole at the discharge connection prevents 

pump air lock.

DANGER:

 ALWAYS disconnect the power to the pump 

before servicing.

DANGER:

 Do not touch the motor housing during 

operation. The motor is designed to operate at high 
temperatures. Do not disassemble the motor housing.

DANGER:

 Do not handle a pump or pump motor with wet 

hands or when standing on a wet or damp surface, or in 
water. lf the basement floor is wet, do not walk on the wet 
area until all power is turned off. If the shut-off box is in the 
basement, call the electric company to shut off service to 
the house, or call your local fire department for instructions. 
Remove the pump and repair or replace. Failure to follow 
this warning can result in fatal electrical shock.

WARNING:

 Release all pressure and drain all water from 

the system before servicing any component.

WARNING:

 Wear safety goggles at all times when 

working with pumps.

WARNING:

 Do not install the Sump Pump Discharge Kit 

threaded fitting above a basin cover because it has a weep 
hole that is designed to leak.

CAUTION:

 Know the pump and its applications, 

limitations, and potential hazards.

CAUTION:

 Periodically inspect the pump and system 

components to ensure the pump intake is free of mud, sand, 
and debris. Disconnect the pump from the power supply 
before inspecting.

CAUTION:

 Follow all safety standards and all local 

electrical codes.

Содержание THD1090







Отзывы: