EverAccess EFC-02-1A Скачать руководство пользователя

Страница: 16 / 75

Hardware Installation

In this chapter, after preparing for the installation, the user is ready to begin the

install. This section will describe, in general terms, how to install the hardware. Here

are the following processes:

•

Mount the enclosure (enclosure optional) and controller

•

Install and connect the card readers

•

Connect the electric strikes or mag locks

•

Connect the controller to the system computer and system reader (system

reader optional)

•

Mount a backup battery in the enclosure (optional)

Mounting the Enclosure and Controller

The controller is an essential part of the access control system. We recommend

mounting it in an EverAccess EPN-871-B metal enclosure (also sometimes referred

to as a panel or a can). The controller should be mounted in a location that is

convenient and easily accessible, but also secure. The controller acts as the brain of

the access control system and can be used to make changes to the database. When

choosing a location to mount the controller, choose a clean, dry location that will

allow the administrator easy access to make changes to the system, but that can be

secured from the general public. The enclosure must be mounted on a sturdy wall

using fasteners or anchors (to be provided by the installer). If you are using an

EverAccess EPN-871-B metal enclosure there must be an AC power outlet for the

enclosure in order to power the controller. (The EverAccess EPN-871-B metal

enclosure uses a 24 V AC power supply with a built in 12 V DC converter.) In

addition, the system computer should be near the controller, so that the controller

can be connected to the PC, allowing the administrator to utilize the Flex Series

software. If the system requires additional door or alarm modules, install them in the

controller before mounting the controller in the enclosure or on the wall.

Please Note:

If the controller screw holes due not line up properly with the

enclosure some filing may be needed for adjustment.

Chapter

Содержание EFC-02-1A












































































Результаты поиска

Содержание EFC-02-1A

Отзывы:

Похожие инструкции для EFC-02-1A

Бренды по названию

Популярные бренды

EverAccess EFC-02-1A, Руководство пользователя

Результаты поиска

Содержание EFC-02-1A

Отзывы:

Похожие инструкции для EFC-02-1A

Бренды по названию

Популярные бренды