Ever Superline 10k, Инструкция по эксплуатации, Страница: 6 / 41

Instruction Manual for SUPERLINE series battery back-ups
2010/01/13
www.ever.eu
6
USER INTERFACE
The user interface consists of a 4-button keyboard, a LCD display and three LEDs
located on the top cover of the battery back-up. It enables the monitoring of the back-
up’s operating parameters and modification thereof. Interface operation and the
meaning of individual parameters are described below.
Figure 3: User interface
Table 1: Meaning of signalling LEDs
Graphic symbol Designation Description
LED 1 Signalling LED indicating the back-up’s operation mode: NORMAL/BATTERY
LED 2 Signalling LED indicating the ON status of the BYPASS line
LED 3 Signalling LED indicating the EMERGENCY mode
Table 2: Optical signalling (LEDs)
LED 1 LED 2 LED 3 Operation mode
UNKNOWN
F NORMAL
ECO
F BYPASS
BATTERY
F STANDBY
F SLEEP
E * EMERGENCY
F INIT
F STOP
* * HYBRID
E – if EPO has been triggered the signalling is off, in all other cases the
signalling of emergency mode is enabled.
F – mode dependent on configuration (no colour or red)
* – blinking
The battery back-up is also equipped with acoustic signalling for individual statuses
of the device (see table).
Table 3: Acoustic signalling
Action Acoustic signalling
NORMAL mode None
HYBRID mode
BATTERY mode
Intermittent signal, rate depending on the charge level of accumulators
(quick rate indicates low charge level)
Forced switch into
STANDBY mode
Intermittent signal – two signals in quick succession followed by a pause
EMERGENCY mode Depending on the event
Overloads Continuous signal
Shorting Quick intermittent signal with a 50-50 distribution
Overheating Slow intermittent signal with a 50-50 distribution
EPO triggered Intermittent signal with a signal/silence distribution of 1s / 5s