Ever Superline 10k, Инструкция по эксплуатации, Страница: 33 / 41

Instruction Manual for SUPERLINE series battery back-ups
2010/01/13
www.ever.eu
33
Switch in the UPS position – normal UPS operation
Switch in the BYPASS position – BYPASS line switched to output clamps. Switching
may be performed at any moment.
COMMUNICATION BETWEEN THE UPS AND A COMPUTER
COMMUNICATION VIA RS232 OR USB
Users have the option to change the battery back-up’s parameters not only via
the user interface (panel) but also via dedicated software.
SUPERLINE series battery back-ups come with enhanced control features. The UPS
is delivered with built-in RS232 and USB communication ports and the PowerSoft
Personal software package. In order to ensure correct cooperation the battery back-
up must be connected to the computer with the provided cable. After the cable is
connected, turn on the back-up, start the computer and install the software in
accordance with the instruction manual or the instructions provided by the installation
software (only Microsoft Windows).
WARNING! Only one type of connection may be used at any given
time.
RS232 and USB ports are separated galvanically from all the other units of the
battery back-up.
EVER SNMP/HTTP NETWORK CONTROL CARD
The EVER control card is an optional component that may be installed by the
user. It integrates the battery back-up with an Ethernet network. The network control
card is located in a special slot located on the rear panel of the battery back-up. With
the adapter installed the user can control the battery back-up from any computer
connected to the network. This solution is most often used in cases of central power
supply or when the power supply system needs to be controlled remotely.
The network control card has the following services implemented:
•
SNMP agent – enables control of the power supply system via a SNMP manager
software;
•
HTTP server – enables inspection and modification of the battery back-up's
parameters via an Internet browser;
More information on the network card adapter can be found in its instruction manual.
WARNING! Installing the SNMP card renders the communication via
RS232 and USB, as well as control via PowerSoft Personal,
impossible.