Ever Superline 10k Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 41

Ever Superline 10k Скачать руководство пользователя страница 21

Instruction Manual for SUPERLINE series battery back-ups

2010/01/13

www.ever.eu

21

INSTALLATION

WARNING! Before installing the battery back-up you must

obligatorily familiarise yourself with the safety and health measures

provided in the previous chapter.

UNPACKING

Please inspect the battery back-up upon receipt. Although the product is delivered in
a packaging it could have sustained damage from inappropriate conditions during
transport. Should you find any damages, please inform the carrier or vendor
immediately.

WARNING! The device may be delivered with its accumulators

connected.

The device is placed on a wooden pallet that facilitates its transportation with
a forklift.
In order to unpack the device you need to cut the belts fastening it to the pallet. Next,
remove the cardboard packaging by sliding it upwards. Remove protective elements.

WARNING! While on the pallet, the device stands on polyethylene

foam which impacts its stability. Upsetting the device may create

hazard to health or life.

If the device is delivered with accumulators, please bear in mind its significant weight
– see the technical parameters table. To remove the device from the pallet use belts
and a lift.
If the device is delivered without accumulators installed, it should be removed from
the pallet by at least 3 persons.

Verify the contents of the packaging. The packaging should contain:

•

the battery back-up,

•

instruction manual and PowerSoft Personal installation CD-ROM,

•

RS232 communication cable to connect the back-up to a computer,

•

USB communication cable to connect the back-up to a computer,

•

A set of 10x38 fuses (2 pcs)

•

warranty card

•

installation grips (2 pcs).

«
...
19
20
21
22
23
...
»

Содержание Superline 10k










































Отзывы:

Нет отзывов