Ever SINLINE RT Скачать руководство пользователя страница 67

Страница: 67 / 75

EVER UPS SINLINE RT / RT XL series instruction manual

www.ever.eu

Pomoc Techniczna, tel.: +48 61 6500 400

2017-04-26 12:41

CAUTION

: Battery life depends on the frequency, the manner of use and

ambient temperature. The battery used in the UPS unit described in this

manual has a design life of 5 years. After that time, battery capacity,

reliability and charging intervals will be considerably reduced. To ensure

maximum efficiency, the battery should be replaced at least every 5

years.

The device should be transported in its original packaging, under conditions specified

in the product specification. EVER Sp. z o.o. shall not be liable for mechanical

damages arising during the transport of the appliance without its original packaging.

DISPOSAL

The disposal / recycling of UPS units and/or batteries should be entrusted to a

specialist waste contractor with suitable license or authorization to engage in waste

disposal / recycling.

The appropriate utilization of used electric and electronic equipment helps to protect

human health and the natural environment against the negative effects caused by the

presence of hazardous materials and components, and the improper storage and

processing of such equipment.

Law dated 29.07.2005 on the used electric and electronic equipment, Art. 22.1

Items 1, 2.

The crossed out waste container symbol means that, in the

European Union, a used product should be handed over to a special

waste handling outlet. This requirement applies both to the UPS unit

itself and to all other accessories marked with this symbol. Such

products should not be disposed of with unsorted municipal waste.

Method of safe removal of the batteries from the device:

The battery should be removed from the UPS unit by an authorized service agent or

by a duly authorized electrician, and subsequently disposed of / recycled by a

specialist waste disposal company.

The manufacturer’s service center has all the equipment necessary to handle such

batteries and equipment in a way that fully complies with the relevant laws and

regulations and with the utmost care for the environment. Please contact our

Содержание SINLINE RT












































































Результаты поиска

Содержание SINLINE RT

Отзывы:

Похожие инструкции для SINLINE RT

Бренды по названию

Популярные бренды

Ever SINLINE RT, Инструкция по эксплуатации

Результаты поиска

Содержание SINLINE RT

Отзывы:

Похожие инструкции для SINLINE RT

Бренды по названию

Популярные бренды