Ever SINLINE RT Скачать руководство пользователя страница 15

Страница: 15 / 75

EVER UPS SINLINE RT / RT XL series instruction manual

www.ever.eu

Pomoc Techniczna, tel.: +48 61 6500 400

2017-04-26 12:41

Canceling

messages

Press the button to cancel the currently displayed message.

Increasing the value

of parameters

Press the button to increase the value of the edited parameter.

Scrolling down

Press the button shortly to scroll down between information screens.

Press the button shortly to navigate down the menu options.

Switching the sound

alarm on/off

Press and keep the button depressed for over 1 second to switch the UPS

unit's sound alarm on/off. The function is only accessible from information

screens.

Navigating to the

end of the submenu

Press and keep the button depressed for over 1 second to navigate to the

end of the submenu.

Decreasing the

value of parameters

Press the button shortly to decrease the value of the edited parameter.

Confirming

messages

Press the button shortly to confirm the currently displayed message.

Table 2. Sound and visual signaling of specific states of the UPS unit

Event

Sound signal

Visual signal

MAINS (normal) mode

No sound signal.

Green LED on.

BACK-UP (battery)

mode

Intermittent signal; frequency increases

proportionally to the level of discharging of

the batteries, until it turns into a continuous

sound. The alarm is only active if activated

(Configuration; Sound signal; Back-up mode)

and if the MUTE function is inactive.

Red LED on.

STANDBY mode

No sound signal

Red LED pulsating (100 ms ON / 5 s

OFF).

INI mode (initialization) No sound signal

Red and green LED pulsating

intermittently (0.5 ms ON / 0.5 s

OFF).

EMERGENCY mode

Red LED pulsating (100 ms ON / 100 ms OFF) with sound alarm on (the signal is

switched on and off with the LED). The alarm is active even if the MUTE function is

inactive.

Содержание SINLINE RT












































































Результаты поиска

Содержание SINLINE RT

Отзывы:

Ever SINLINE RT, Инструкция по эксплуатации, Страница: 15 / 75

Результаты поиска

Содержание SINLINE RT

Отзывы: