Eventide H90 Harmonizer, Руководство пользователя

Страница: 96 / 176

Performance Parameters
1-Button Looper: The 1-button looper allows you to easily control the transport of the looper using a single
Footswitch.
Press once to begin recording a loop. Press again to fi nish recording and play the loop.
While the loop is playing:
Press the Footswitch to toggle overdub on/off.
Press-and-hold the Footswitch to undo/redo.
Double-press the Footswitch to stop playback of the loop.
While the loop is stopped, press-and-hold the Footswitch to empty the loop.
The following performance parameters can only control a single aspect of the looper’s transport. It is
recommended to map these to an external aux switch or MIDI controller.
Record: Press the Footswitch to start recording a loop.
Play: Press the Footswitch to play a loop that has been recorded. The Playmode parameter will determine
how this works.
Stop: Press the Footswitch to stop playback of the loop.
Empty: Press the Footswitch to empty the loop.
Undo/Redo: Press the Footswitch to undo the last overdub. Press it again to redo.
Modulation
Chorus
Chorus is an effect that takes a single voiced instrument and gives it the sound of many instruments
playing together. This is achieved through randomly modulating several delay lines to create pitch and
timing imperfections and then panning these voices in the stereo
fi eld.
Intensity: Dry / wet mix.
Type:
Liquid
Organic
Shimmer
Classic
Depth: Sets the modulation sweep range from narrow to wide.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
96
10. ALGORITHM GUIDE