Eventide H90 Harmonizer, Руководство пользователя

Страница: 124 / 176

Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Performance Parameters
Retrigger: Retriggers the primary and secondary modulation LFOs to the beginning of their cycles. Useful
for re-syncing during playback, or creative effects.
Speed / Brake: The Brake engages while this switch is pressed. Short-press to toggle between Fast and
Slow. Long-press to engage Brake.
Fast / Slow: Press to toggle between Fast and Slow, which slows the primary and secondary LFOs by a
predetermined factor. The Brake does not engage while this switch is pressed.
Brake (M): Slows the LFOs at a constant rate and pauses the LFOs until the switch is released.
Multi
SpaceTime
SpaceTime is a multi-effects Algorithm combining Modulation, two Delays, and Reverb into one, easy to
use effect. Modulation is most similar to a chorus and is the
fi rst effect in the signal path. The Delays are
based on Eventide’s Vintage Delay Algorithm from the TimeFactor pedal and the Reverb section draws
from both the Plate Algorithm in Eventide’s SPACE pedal, as well as Eventide’s ULTRA REVERB Native
Plug-in. Unique to SpaceTime is the ability to route the Delays and Reverb in series or parallel after
Modulation, further adding to its versatility and creative applications.
Mix: Controls overall Algorithm wet/dry balance. 100% is all wet signal.
Mod Amt: Adds Modulation to entire signal path. Modulation depth also increases as you go from 0
to 100.
Mod Rate: Adjusts the speed of the LFO controlling the Modulation section of SpaceTime.
Continuously adjustable from 0.05Hz to 12.50Hz.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
124
10. ALGORITHM GUIDE