Eventide H90 Harmonizer, Руководство пользователя

Страница: 74 / 176

For mono output:
Delay Mix = 0%, output 1 will have only delay A’s contribution.
Delay Mix = 50%, output 1 has an equal amount of delay A and delay B.
Delay Mix = 100%, output 1 will have only delay B’s contribution.
For stereo output:
Delay Mix = 0%, both outputs will have only delay A’s contribution.
Delay Mix = 50%, delay A goes to output 1 only and delay B goes to output 2 only.
Delay Mix = 100%, both outputs will have only Delay B’s contribution.
Delay A: Sets delay time from 0 to 3000 ms (milliseconds). With Tempo Sync OFF, delay is
displayed in ms. With Tempo Sync ON, delay can be sync’d to the tempo and is displayed as a
rhythmic sub-division of the tempo beat value from No Delay to a whole note in common note
increments.
Delay B: Same as A.
Feedback A: Controls level of Feedback A, the number of repeats.
Feedback B: Same as A.
X-Fade: When delays change, performs a crossfade function to prevent abrupt changes that could
result in glitching or clicking. X-Fade sets the speed of the crossfade. Small values result in rapid
crossfades, larger values more gradual crossfades. Crossfade rates vary from 2 ms to 200 ms.
Modulation Depth: Selects the amount of delay modulation (0 = Off, 10 = Max).
Modulation Speed: Sets the delay modulation rate (0 - 5 Hz).
Filter: A low pass/high pass fi lter variable from -100 (max high pass) to 0 (no fi ltering) to 100 (max
low pass) to change the tone of your delay repeats.
Ducked Delay
The delay levels are dynamically lowered while you’re playing and restored to their normal levels when
you stop playing.
Mix: wet/dry mixer, 100% is all wet signal.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
74
10. ALGORITHM GUIDE