DIR911 Instant Recall Recorder
©2000 Eventide Inc.
2
Initial Setup
UNPACKING THE UNIT
The Eventide DIR911 is shipped with a power supply (cable attached), an RJ-11 cable, this
manual, and the Quick Reference Guide.
Connecting the Unit
(A) Power
Supply
WARNING: Improper power supply connection can damage the DIR911 and can
cause electric shock. For proper operation, use ONLY the power supply provided
with the unit
Before applying power to the DIR911, make sure that the outlet into which you are plugging the
power supply is a standard 110 VAC outlet. Any other voltage could damage the power supply
and in turn damage the DIR911. Plug the mini-XLR locking connector from the power supply
into the rear panel of the DIR911 first, then plug the power supply into the AC outlet.
(B) Telephone
Line
The DIR911 has two RJ11 female connectors on the back panel. The phone line can be
plugged into either; they are electrically connected together inside the DIR911. Both connectors
are wired as follows:
Pin 2 is phone plug tip (pin 3 on 6 pin connector)
Pin 3 is phone plug ring (pin 4 on 6 pin connector)
Two connectors are provided should you need a loop-through line.
POWER-UP Screen
When power is first applied to the DIR911, the POWER UP screen displays momentarily. It
gives you the model number and the current software version of the unit.
MAIN Screen
The MAIN screen comes up on the display automatically. This is where all operations begin.
EVENTIDE
MODEL DIR 911
DIGITAL INSTANT RECALL
SOFTWARE VERSION 1.00
07-Oct-97 11:45:32
Msg # 001/999
Ready
1-Jan-89 00:00:00
0000000000000000
Msg Len 00:00:00
RESTORE PREV MSG NEXT MSG SYSTEM
