![Evenflo Sonus 65 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/evenflo/sonus-65/sonus-65_quick-start-manual_2442121015.webp)
24
25
Rear-facing
LATCH is a system for attaching the child restraint to your
vehicle seat. It is to be used in place of your vehicle’s seat
belts and can be used in vehicles with LATCH anchors.
DO
NOT
install this child restraint with LATCH and the
vehicle’s seat belts. Your vehicle owner’s manual may
refer to this system as ISOFIX, Universal Anchorage
System (UAS), or Lower Universal Anchorage System.
• To avoid a strangulation hazard, you
MUST
store the
unused lower anchor connector assembly, with all slack
removed, in storage area on the bottom of the seat
). Roll or fold excess lower anchor connector
strap and secure with a rubber band to prevent serious
injury to vehicle occupants.
1
ARROW
MUST BE LEVEL WITH
GROUND WHEN USED REAR-FACING
REAR OF VEHICLE
Infants
MUST
always ride
facing the rear of the vehicle.
NEVER
turn a child restraint
forward-facing
with a child
who weighs less than 10 kg (22 lbs) .
Crash forces may cause serious
injury or death.
For complete child requirements for
.
Adjust the child restraint to the
recline position
(p.
). Place the child restraint in your vehicle
rear-
facing
. Adjust the restraint so that the level arrow is level
with the ground.
ARROW
MUST
BE LEVEL WITH
GROUND WHEN USED REAR-FACING
REAR OF VEHICLE
WARNING
WARNING
Using the Child Restraint
Rear-facing
Rear-facing Installation with
Lower Anchor Connectors
IMPORTANT:
Once your child
exceeds
any of the size
requirements above, they
MUST
use this child restraint
in the
forward-facing
orientation, if possible. If your
child
exceeds
any of the size requirements above
and
is less than 2 years old, however, you
MUST
discontinue
use of this child restraint.
Note:
When in rear-facing position, bottom of child
restraint
MUST
be entirely on vehicle seat.
2.5 cm (1 in.)
or more
Rear-facing
Belt Path
Harness straps are
at, or slightly below
the child’s shoulders.
Lower Anchor
Connector
Assembly
Child Requirements:
•
Weight:
2.3 to 18 kg (5 to 40 lbs)
•
Height:
48 to 102 cm (19 to 40 in.) and top of child’s
head is at least 2.5 cm (1 in.) below the top of the
child restraint seat back