22
23
Child Restraint Features (cont.)
Buckle Cover
Body Pillow
Child Restraint Features (cont.
)
•
DO NOT
use the cup holders to store cans or hard
cups. Only for use with soft cups
(such as styrofoam or paper).
•
DO NOT
place any cups that contain hot liquids in the
cup holders.
•
DO NOT
attach additional items to this child restraint
that are not approved by Evenflo. Items not tested
with the child restraint could injure the child.
Cup Holder Liners
To install the cup
holder liners, press
the cup holder liners
into the cup holder
receivers.
Note:
Cup holder liners may be removed for cleaning.
Dishwasher safe (top rack only).
Install Harness Covers
above Chest Clip for added
comfort. Wrap Harness
Covers around harness
straps and attach Velcro
strips as shown.
Velcro
®
To remove the buckle cover,
press the red buckle release
under the buckle cover, and
remove buckle tongues. Pull
buckle cover off the buckle.
To reattach the buckle cover
press the red buckle release,
and remove buckle tongues.
Push the buckle cover onto
the buckle.
Not available on all models. Styles may vary.
The optional Body Pillow,
when placed in the restraint,
as shown, helps support your
child.
The optional Infant Head
Support should lie flat
against the seat back, as
shown. Be sure to cut off the
plastic attachment between
the head support and the
seat pad. Small parts may be
a choking hazard.
Note:
Attach Infant Head
Support through harness
slots just above harness
straps.
Note:
The optional Infant Head Support and Body Pillow
are for
Rear-facing
use only.
WARNING
Important
Harness Covers
Cupholder
