EVCO S.p.A.
6.4
Battery status
The battery charge indicator is always shown
of the display. When battery is fully charged
input closed), all indicator lines become green
recharging (battery digital input open) the indicator has
growing green lines. In the event of a power failure
battery charge counter will estimate the battery operation time
and will decrease the indicator accordingly: one line
quarter of battery capacity used to supply the controller.
When the battery voltage drops to the extent
functioning is hindered, the icon
will appear on the
display. Under such circumstances, operate as follows
-
disconnect the battery
-
power off the system and wait a few seconds
-
power back on the device ensuring a proper mains
voltage.
If that does not resolve the issue, contact the EVCO
network.
6.5
Keypad lock/unlock
The keypad lock is enabled by parameter D08.
keypad cannot be locked; if set to 1, the lock can be manually
activated from the HOME screen by pressing in succession the
keys HOME and MENU: a closed padlock icon
displayed for 3 seconds.
The keypad lock prevents the access to all menus and
functions, except for the following ones:
-
turning on/off the light
-
silencing the buzzer
To unlock the keypad, press in succession the keys
MENU: an open padlock icon will be displayed for 3 seconds.
The procedure is facilitated by a pop-up displayed
key is pressed while the keypad is locked and by the ba
on the key MENU which is lighted up after pressing the key
HOME.
6.6
Turning on/off the cabinet light
The function is accessible manually no matter if the keypad is
locked.
Parameter C05 enables the turning on/off of the cabinet light
C05=0
the light is turned on /off by pressing the key
“light” and following a door opening
enabled by parameter C01.
C05=1
the light is turned on /off only by pressing the key
“light”.
6.7
Silencing the buzzer
To silence the buzzer, operate as follows:
1.
make sure no procedure is in progress
2.
press any key (when pressing the key once, the
relevant function is not activated
EVFTFT219 | Installation guide
pagina 16 di 50
shown on the top right
When battery is fully charged (battery digital
all indicator lines become green; while
the indicator has
the event of a power failure, the
estimate the battery operation time
one line less every
e controller.
battery voltage drops to the extent that its correct
will appear on the
Under such circumstances, operate as follows:
off the system and wait a few seconds
device ensuring a proper mains
contact the EVCO sales
D08. If set to 0, the
the lock can be manually
pressing in succession the
a closed padlock icon
will be
The keypad lock prevents the access to all menus and
the keys HOME and
displayed for 3 seconds.
displayed whenever a
key is pressed while the keypad is locked and by the backlight
after pressing the key
cabinet light
ible manually no matter if the keypad is
enables the turning on/off of the cabinet light:
he light is turned on /off by pressing the key
door opening/closure if
by pressing the key
make sure no procedure is in progress.
the key once, the
relevant function is not activated).
When the key is pressed, the icon
display and after G01 seconds
G01=0, the buzzer will not be reactivated
Battery charge status
Pop-up for the keypad unlock procedure
Installation guide ver. 1.0 | Code 144FTFT219E104
When the key is pressed, the icon
appears on the
the buzzer is reactivated. If
the buzzer will not be reactivated.
Battery charge status
for the keypad unlock procedure