EVCO S.p.A.
EVFTFT219 | Installation guide ver. 1.0 | Code 144FTFT219E104
pagina 11 di 50
3.3
User interface installation
The following drawing explains how to install the user interface.
Installation is by back-panel, with threaded studs and guarantees flush mounting.
3.4
Control module installation
The control module is to be installed on a flat surface, with spacers.
3.5
Installation warnings
-
make sure that the device work conditions (temperature of use, humidity, etc.) lie within the limits indicated; see chapter
Errore. L'origine riferimento non è stata trovata.
“
Errore. L'origine riferimento non è stata
trovata.
”
-
do not install the device near to any heat sources (heating elements, hot air ducts etc.), equipment containing powerful
-
do not install the device near to any heat sources (heating elements, hot air ducts etc.), equipment containing powerful
magnets (large diffusers, etc.), areas affected by direct sunlight, rain, humidity, excessive dust, mechanical vibrations or
shocks
-
any metal parts in proximity of the control module must be at a distance such that they do not compromise the safety
distances.
-
in compliance with Safety Standards, the device must be installed correctly and in a way to protect against any contact with
electric parts; all parts that ensure protection must be fixed in a way that they cannot be removed without the use of tools.