EVCO S.p.A.
If ON-OFF type compressors are to be used, p
The following combinations are possible for O
-
1 compressor without parcelling (
- 2
independent
compressors
with
compressor 1” and compressor 2
-
1 compressor with pacelling (CF1
step 2 is connected to output “Co
7.1.1
Oil refresh
If the compressor is running at a frequency lo
at the maximum power. The compressor will
EV3 CHIL & EVD CHIL | Installer manu
page 32 of 46
parameter CP08 must be set at 0.
ON-OFF adjustment:
(CF11 = 1; Cf12 = 0). Compressor is connected to output DO
hout parcelling (CF11 = 2; Cf12 = 0). Compressor 1 is
2 is connected to output “Compressor 2”.
11 = 1; Cf12 = 1). Compressor step 1 is connected to outpu
ompressor 2”.
ower that the CP09 parameter for a period longer than the CP
remain at the maximum power until it reaches the set-point.
ual ver. 1.2 | Code 1443DCHILE124
O4.
connected to output “Enable
ut “Enable compressor 1” and
P10 parameter, it is activated
