Evco C-PRO GIGA, Руководство по применению, Страница: 28 / 124

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page
28
There are also 3 LEDs:
- L0 associated with the K0 key, identifies whether there are any alarms.
Off: there are no alarms.
Flashing slowly: indicates the presence of new alarms
Flashing rapidly: indicates that alarm pages are being viewed.
On: all active alarms have been viewed
-
L2 associated with the K2 key, identifies the status of the RTC and the
time bands:
Off: no signals.
Flashing rapidly: indicates there is an ERTC clock alarm.
Flashing slowly: indicates that the compressor or fan setpoint is
changed within the time bands.
On: indicates that the compressor and fan setpoint are both changed
within the time bands.
- LEsc associated with the ESC key, identifies the status of the machine:
Off: machine off
On: machine on
Flashing slowly: machine switched off by digital input
Flashing rapidly: machine switched off by supervisor system.
4.2 Page list
This section will introduce the application’s main pages and menus. As already mentioned, the main
menu is subdivided into four levels: user, service, installer and system builder, plus a menu for
managing the functions associated with the system clock and certain free-access pages.
The menu structure is as follows:
⋅
Clock menu
⋅
General menu
⋅
User menu (Level 1, level 1 password)
⋅
Service menu (Level 2, level 2 password)
o
Service menu – operations branch
o
Service menu – manual branch
o
Service menu - input/output branch
⋅
Installer menu (Level 3, level 3 password)
o
Installer menu - settings branch
o
Installer menu – compressor branch
o
Installer menu fans branch
o
Installer menu - safety devices branch
o
Installer menu - miscellaneous branch
⋅
System builder menu (Level 4, level 4 password)
o
System builder menu – systems branch (configuration wizards)
o
System builder menu – hardware branch
o
Installer menu – parameters branch