Evco , c-pro 3 micro+ Скачать руководство пользователя страница 52

Страница: 52 / 62

EVCO S.p.A.

c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104

page 52 of 62

7.5. Vcolor

7.5.1. Introduction

Vcolor is a new and innovative user interface for the programmable controllers of the family c-pro 3.

The main features of the interface are the possibility to communicate to the user a great deal of information and the remarkable ease of

control; these features are due to the use of a 320 x 240 pixel colour touch-screen TFT graphic display and to the CAN bus (for the

connection to the controllers).

This last also allows the use of the interface in multimaster networks.

Thanks to its constructive features, Vcolor offers several mounting typologies; this is possible:

by panel, at the front of units, of machines for refrigeration or for air conditioning, of electrical panels and as well as in all those

applications where a frontal protection degree IP65 is required

built-in by wall, in traditional box (like "506" by BTicino)

by wall, on the support CPVW00 by EVCO (to order separately).

Also the necessity to customize the interface, in order to integrate it aesthetically in residential and commercial environments, is

satisfied by Vcolor since at the front of the interface one can apply both the plates CPVP* by EVCO (to order separately, made in

plastic material and available in two different colorations, white and black) and the numerous plates series "Living" and "Light" by

BTicino.

Vcolor also has got:

real time clock

alarm buzzer

RS-485 communication port with Modbus communication protocol

USB communication port.

For further information consult the Hardware manual of Vcolor.

7.5.2. Summarizing table of the main features and available models

Vcolor

Power supplì

24 VAC / 20... 40 VDC not isolated

Real time clock

incorporated

Alarm buzzer

incorporated

Display

320 x 240 pixel

touch-screen TFT graphic display

Communication ports

CAN

port

with

CANbus

communication protocol

USB (for programming)

RS-485

with

Modbus

communication protocol

a + b + c

Code

EPV4CBR

For further models please contact the EVCO’s sales network at the address [email protected].

Содержание , c-pro 3 micro+































































Результаты поиска

Содержание , c-pro 3 micro+

Отзывы:

Evco , c-pro 3 micro+, Руководство по оборудованию, Страница: 52 / 62

Результаты поиска

Содержание , c-pro 3 micro+

Отзывы: