Evco , c-pro 3 micro+ Скачать руководство пользователя страница 25

Страница: 25 / 62

EVCO S.p.A.

c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104

page 25 of 62

USER INTERFACE

5.1. Keyboard

The following table shows the meaning of the keyboard.

Button

Preset function

cancel, hereinafter also called “button ESC”

move to left, hereinafter also called “button LEFT”

increase, hereinafter also called “button UP”

decrease, hereinafter also called “button DOWN”

move to right, hereinafter also called “button RIGHT”

confIrmation, hereinafter also called “button ENTER”

The keyboard is not available in the blind versions.

5.2. Signalling LEDs

5.2.1. LEDs at the front of the device

The following table shows the meaning of the LEDs at the front of the device.

LED

Meaning

LED power supply

if it is lit, the device will be powered

if it is out, the device will not be powered

RUN

LED run

if it is lit, the application software will be compiled and running in release modality

if it flashes slowly, the application software will be compiled and running in debug modality (condition not allowed in

c-pro 3 EXP micro / micro+ and in in c-pro 3 EXP kilo / kilo+)

if it flashes quickly, the application software will be compiled, running in debug modality and stopped in a breakpoint

(condition not allowed in c-pro 3 EXP micro / micro+ and in in c-pro 3 EXP kilo / kilo+)

if it is out (condition not allowed in c-pro 3 EXP micro / micro+ and in in c-pro 3 EXP kilo / kilo+):

the controller will not be compatible with the application software

the controller will not be enabled to work with the Special ABL (Application Block Libraries)

LED system alarm

if it flashes slowly, a system alarm with automatic reset will be running

if it is lit, an alarm system not restorable via software will be running

if it flashes very slowly, an access to the external flash memory will be running

if it flashes quickly, a system alarm with manual reset will be running

if it is out, no alarm system will be running

Содержание , c-pro 3 micro+































































Результаты поиска

Содержание , c-pro 3 micro+

Отзывы:

Evco , c-pro 3 micro+, Руководство по оборудованию, Страница: 25 / 62

Результаты поиска

Содержание , c-pro 3 micro+

Отзывы: