Page 8
GENIUS BLE 100
INBETRIEBNAHME
GENIUS BLE 100 can easily be mounted on all known valve bodies (see adapter list at: https://eurotronic.org/service/
faq/).
1. Unscrew the old thermostatic head completely, loosen the fastening and pull it off the valve (Fig. 3)
2. If necessary, select a suitable adapter and mount it on the valve (Fig. 4)
3. Screw the thermostat onto the valve or adapter by turning the union nut clockwise (Fig.5).
CAUTION:
Make sure that the device is in the installation mode even if it is installed/removed later.
Only assemble/disassemble in this position.
6.2 INSTALLATION AT THE RADIATOR
Fi
g
. 4
F
i
g.
3
F
ig
.
5
