GB item number 16620
Digital battery tester, 2-in-1
Operating instructions
Table of contents
Introduction
Intended purpose
Specification
Safety notes
Operation of battery tester
Operation of mode with automatic switch off
Maintenance
Disposal
Contact information
Introduction
Thank you for choosing the digital battery tester, 2-in-1, With the help of the digital battery tester, 2-in-1, it is
possible to check the battery at any time. The monitoring of your battery enables you to protect the battery
from deep discharges. Deep discharging will damage or destroy the starter battery of your car.
The digital battery tester is made up of a digital display that shows the charge state of the battery and an
adjustable 12 V plug that will almost always enable you to position the device where it can easily be read.
On the front there is an additional 12 V connection. This enables you to read the battery status while
operating another device connected the same vehicle socket or the cigarette lighter.
Before you use the digital battery tester, read these instructions through carefully and observe all safety
notes. Always store these operating instructions for reference purposes and ensure that they are passed on
with the device.
Intended purpose
The digital battery tester is designed solely for displaying the charge status (capacity) of 12 V batteries in
vehicles. It is suitable for all vehicles with a standard 12 V socket or cigarette lighter.
In addition, the digital battery tester has a built-in protection circuit which deactivates connected consumers
if the capacity of the battery drops to 5 % or less.
Specifications
Description
Digital battery tester, 2-in-1
Operational voltage
12 Volt DC
Maximum power consumption
8 A
Display
2 figures
Connection options
1x 12 V DC socket
Weight
135 grams
Safety notes
Before you start to install and put the device into operation, the operating instructions must be read through
in full.
•
Keep away from children.
•
Protect the unit from wet conditions and damp.
•
In the event of a defect, have it repaired by a specialist only. In the event of damaged housing, dispose
of properly.
The manufacturer is not liable for damages caused as a result of incorrect installation or use.
•
Only suitable for 12 V DC operating voltage.
•
Only connect consumers with a maximum power of 8 Amperes.
•
Only use in closed spaces or vehicles.
Operating the battery tester
To operate the battery tester, connect the plug contact to the 12 V socket of your vehicle and adapt the
angle of the plug in accordance with the space available to you. The display automatically shows the current
