Eurotherm 7100A, Руководство пользователя

Страница: 17 / 55

Identification
7100A User Manual 1-12
Options
11. Control options Code
Voltage control (V 2 ) V2
PA only:
Current control (I 2 ) I2
Open loop OL
C16 and PA only:
Voltage control (V 2 ) and
Current limit V2CL
Power control (V x I) and
Current limit VICL
11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20
Options
15.OverLoad alarm Code
( with DLF option and burst firing)
Overload alarm except codes
SWIR, XFMR, VICL and V2CL ICO
No over-current alarm XXXX
12. Delay on first firing Code
Burst firing C16 or C64:
Transformer primary XFMR
Other configurations XXXX
14. Load type Code
With DLF option: Short wave infrared SWIR
Low temperature coefficient load LTCL
Without DLF option or
High temperature coefficient load XXXX
13. Load Monitoring alarms Code
Serious Alarms:
Thyristor short-circuit,
Total Load failure,
over-temperature for rating 250 A GRF
Partial load failure and
Serious alarms DLF
No alarms NONE
16. Alarm relay contact Code
With alarm option:
Contact closed on alarm NC
Contact open on alarm NO
Without alarm option XX
17. XXXX
19. Certification option Code
No certificate of
‘Compliance with Order’ NONE
Certificate of ‘Compliance with Order’ CFMC
Certification Options and
Warranty extension
18. XXXX
20. Warranty extension Code
Without warranty extension NONE
Warranty extended to 5 years WL005
71A1_Identification_ENG_Iss2_1.qxp 1/09/06 16:12 Page 1-12