EK-MFR/1 Arch.2573
Rev. E of 22/06/2007
Sh. 21 of 35
501-000658/MN
Eurotek s.r.l.
M25P80 1024KB SPI flash found
Go to last event ...
Thu Apr 27 12:32:28 2005 [000166]: Slot 4 IF Rx Lev R -18.3
Thu Apr 27 12:32:28 2005 [000165]: Slot 4 IF Tx Lev R -12.2
Thu Apr 27 12:32:28 2005 [000164]: Slot 4 IF Rx Lev A -44.5
Thu Apr 27 12:32:28 2005 [000163]: Slot 4 IF Tx Lev A -30.1
Every line of the log file is featured by:
•
The date and the time in which the alarm is revealed
•
The progressive alarm number (from the last to the first).
•
The slot in which is located the board with the variables out of the limits .
•
The variable name that is affected by the alarm.
•
The letter (A or R) that indicates the status of the alarm. The A letter indicates that an alarm
is happened, while the R letter indicates that the alarm is stopped
•
The variable value.
7.2.2 Erase_log
The erase_log command allows to erase the log file. When the command is launched, the below
view is showed on the screen of the terminal unit:
$ erase_log
M25P80 1024KB SPI flash found
Log event bulk erase ... log_event_erase ... OK
No item found
log_add_event pbuf=0
log_add_event write Log erased
page_program return 40
The first line of the new log file, after that the erase_log command is executed, is:
Thu Apr 27 12:33:10 2005 [000000]: Slot 4 Log erased
The progressive alarm number is deleted (
[000000]
) and the
Log erased
label
is showed.
7.2.3 Passwd
The passwd command allows to change the password value for the super_user login. When the
command is executed, the next page is visible on the screen of the terminal unit
$ passwd
Changing password for super_user
Old password: ------
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:hello12
