EUROTECNO S.R.L Maior Omnia, Руководство по инструкции, использованию и обслуживанию, Страница: 20 / 50

EN
3 - INSTALLATION
THIS MANUAL IS PROPERTY OF EUROTECNO S.R.L.
– REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.
3 - 4
3.5. HANDLING AND INSTALLATION
3.5.1 Equipment installation (Omnia® Cielo)
Safety warnings
WARNING:
These tasks must be carried out by specialised and authorised
operators, who shall ensure that all unauthorised personnel or
persons, potentially exposed to danger, maintain a safe distance from
the installation area.
Before proceeding, make sure that the line voltage corresponds to the
one that appears in paragraph 2.1 "Technical data/characteristics".
Type of
anchorage
According to the kind of ceiling, the support plate fastening can be made with
different anchoring systems. For further information, please refer to paragraph 6.2
"Anchors specifications".
For hollow flooring blocks, hollow flat blocks/tiles and hollow bricks it is possible to
use the following anchoring systems:

FIS HK 16 X 85 art. 41902 (FISCHER brand) screw anchor, with FIS M8
X 110 threaded bar art. 509124 with locking chamfer.

FIS HN 16 X 85 art. 50470 (FISCHER brand) injection anchor sleeve,
with FIS M8 X 110 threaded bar art. 509124 with locking chamfer.
For solid materials, such as reinforced concrete:

SXR 10 screw anchor (FISCHER brand).
WARNING :
An assembly process that have been incorrectly executed can
compromise the proper functioning of the equipment and cause
damages to objects or persons. The provided information regarding
the type of screw anchors to use is to be considered indicative, as it is
based on the experience of our technicians and is given after careful
evaluations. Nevertheless, please examine in details the technical
sheets contained in the CD attached, regarding anchors and screws,
in order to identify more precisely the most suitable screws/anchors
for your specific installation site. EUROTECNO s.r.l cannot be held
liable for the incorrect choice of anchors/screws or for the machine
assembly.
Required tools

Drill (without hammer function);

Drill bits with the diameter needed for the identified screw anchor; will be
requested also a pre-drilling bit whose diameter is a few millimetres smaller,
in order to make an initial guide hole;

Pencil to mark out the holes;

Anchor screws and chemical anchors as previously indicated;

Socket wrench to fasten the M10 nuts (Socket wrench ch 17 mm);

Assembly template with the outline of the support plate;

Sustaining ceiling support plate for Maior Omnia® Tv lift;

Maior Omnia® Tv lift with positioning structure.
Number of
operators

For the equipment installation are needed two installers.