Eurotech DynaGate 10-12 Series, Руководство пользователя

Страница: 4 / 94

Contents DynaGATE 10-12 User manual Rev. 0-14
7 Interfaces overview 29
7.1 Front side overview 29
7.2 Rear side overview 30
7.2.1 Service Panel interfaces 31
7.3 Right side overview 32
7.4 Left side overview 33
7.5 LED indicators overview 34
8 Interfaces in detail 35
8.1 Wi-Fi and Bluetooth (only for versions: -X2, -X5, -X6, -X7) 35
8.1.1 Wi-Fi specifications 35
8.1.1.1 2.4 GHZ TX output power 35
8.1.1.2 5 GHZ TX output power 35
8.1.2 Bluetooth specifications 36
8.1.3 BLE specifications 36
8.1.4 Wi-Fi and Bluetooth antennas connectors specifications 36
8.2 Internal mobile connectivity (only for versions: -X3, -X4, -X5, -X6, -X7) 37
8.2.1 Internal modem specifications (according to product versions) 37
8.2.1.1 Product features 37
8.2.1.2 LTE data 37
8.2.1.3 Supported bands 37
8.2.1.4 TX output power 37
8.2.1.5 Main antenna requirements 38
8.2.1.6 Second antenna requirements (for antenna diversity) 39
8.2.2 Internal mobile antennas connectors specifications 40
8.3 The MicroSIM card receptacles 41
8.3.1 How to insert / remove the MicroSIM card 41
8.3.1.1 If you are using the receptacle on the top side of the circuit board 41
8.3.1.2 If you are using the receptacle on the bottom side of the circuit board 42
8.4 Internal GNSS 43
8.4.1 Internal GNSS specifications 43
8.4.2 Internal GNSS antenna connector specifications 43
8.5 Digital I/Os 44
8.5.1 Insulated Digital Inputs 44
8.5.1.1 Electrical specifications 44
8.5.1.2 Electrical schematics 44
8.5.2 Insulated Digital Outputs 45
8.5.2.1 Electrical specifications 45
8.5.2.2 Electrical schematics 45
8.5.3 Digital I/Os connector specifications 45
8.6 COM ports 0 and 1 for DynaGATE 10-12-XY with X ≤ 3 46
8.6.1 Note for termination resistors (only for RS-485 mode) 46
8.6.2 Note for fail safe resistors (only for RS-485 mode) 46
8.6.2.1 Switches meaning 46
8.6.3 COM connector specifications 47
8.7 COM ports 0 and 1 for DynaGATE 10-12-XY with X ≥ 4 48
8.7.1 Note for termination resistors (only for COM 1 in RS-485 mode) 48
8.7.2 Note for fail safe resistors (only for COM 1 for RS-485 mode) 48
8.7.2.1 Switches meaning 48
8.7.3 COM connector specifications 49
8.7.4 Note for RS-485 Half Duplex (only for COM 0 in RS-485 mode) 49
8.8 CAN ports 0 and 1 50
8.8.1 CAN 0/1 connector specifications 50
8.9 Ethernet ETH 0 and 1 51
8.9.1 Ethernet specifications 51
8.9.2 ETH 0/1 connectors specifications 51
4 / 94