Eurotech DynaGate 10-12 Series, Руководство пользователя

Страница: 50 / 94

8 Interfaces in detail DynaGATE 10-12 User manual Rev. 0-14
8.8 CAN ports 0 and 1
The DynaGATE 10-12 provides 2x CAN (Controller Area Network) ports compliant with the CAN
Specification 2.0, Parts A and B:
l
CAN 0
l
CAN 1
The CAN 0/1 connectors are available on the front side.
Notes about CAN power supply:
l
The DynaGATE 10-12 can supply power to the 2 CAN ports: 100 mA @ 5V (each port)
l
CAN power can be enabled / disabled by software
l
The interfaces are surge protected.
8.8.1 CAN 0/1 connector specifications
Connector Layout:
8 1
Connector Specifications:
l
Base strip, Header
l
Gender: Male
l
Type: 8-pin, 3.5 mm pitch
Mating Connector Specifications:
l
Pluggable screw terminal block;
l
Gender: Female
l
Type: 8-pin, 3.5 mm pitch
l
Example:
Manufacturer: Phoenix Contact
Part Number: MC 1,5/ 8-STF-3,5 - 1847181
(or equivalent)
Connector Pinout:
Pin # Signal Type Description
1 CAN 0: H IO CAN port 0 Positive Data
2 CAN 0: L IO CAN port 0 Negative Data
3 CAN 0: 5V 5 CAN node 0
5 V Output power supply
4 CAN 0: GND P Ground
5 CAN 1: H IO CAN port 1 Positive Data
6 CAN 1: L IO CAN port 1 Negative Data
7 CAN 1: 5V 5 CAN node 1
5 V Output power supply
8 CAN 1: GND P Ground
50 / 94