Eurotech BoltGATE 20-25, Руководство пользователя

Страница: 3 / 102

BoltGATE 20-25 User Manual Rev. 1-1 How to Get Started
H
OW TO
G
ET
S
TARTED
To get started with the BoltGATE 20-25, complete the following steps:
1. Read carefully and understand the instructions and warnings contained in this manual.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the
instructions and warnings contained in this manual.
For more information see:
"Safety Instructions" on page 9 .
Whenever in doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see:
"How to Receive Technical Assistance" on page 13 )
2. Know the BoltGATE 20-25 and its interfaces.
For more information see:
l
"Product Overview" on page 17
l
"Technical Specifications" on page 19
l
"Front Side Overview" on page 25
l
"Rear Side Overview" on page 49
3. Understand how to log in the Administration Console and how to access the interfaces
under Linux.
For more information see:
l
"How to Log in the Administration Console" on page 67
l
"How to Access the Interfaces Under Linux" on page 69
4. Install the BoltGATE 20-25.
For more information see:
l
"Mechanical Specifications" on page 91
l
"How to Install the Product" on page 93
5. Supply power to the BoltGATE 20-25 respecting all safety instructions.
For more information see: "How to Supply Power to the Product" on page 95
6. Start developing your IoT application.
The BoltGATE 20-25 can be pre-configured with ESF, the Eurotech Everyware Software
Framework.
ESF is a smart application container that enables remote management of IoT gateways and
provides a wide range of APIs allowing you to write and deploy your own IoT application.
For more information see:
l
"Eurotech Everyware IoT" on page 87
l
http://esf.eurotech.com/docs .
3 / 102