Eurotech BoltGATE 20-25, Руководство пользователя

Страница: 67 / 102

BoltGATE 20-25 User Manual Rev. 1-1 9 How to Log in the Administration Console
9 H
OW TO
L
OG IN THE
A
DMINISTRATION
C
ONSOLE
This section describes how to enter the Administration Console to access the BoltGATE 20-25 Linux
Operating System.
To login the Administration Console, use one of the following methods:
l
Direct login via Console Port
l
Remote login via Secure Shell (SSH)
9.1 Default Credentials
The default credentials are the following (case sensitive):
l
Username: root
l
Password: eurotech
9.2 How to Login Using the TTL Serial Console
To log in using the Console port, complete the following steps:
1. To log in using the TTL Serial Console, complete the following steps:
2. Setup a Development PC (for example: a laptop) with a free USB port
3. Make sure that both the Development PC and the BoltGATE 20-25 are turned OFF
4. Connect the TTL-to-USB Cable between the USB port (of the Development PC) and the TTL Serial
Console (of the BoltGATE 20-25)
5. Turn ON both the Development PC and the BoltGATE 20-25
6. Use the Development PC to login the Administration Console:
a. Run a terminal emulator (example: Tera Term on Windows)
b. Configure the serial port connection with these parameters: 115200, 8 bits, 1 stop bit, no
parity, no flow control
c. Enter the default case-sensitive credentials when the prompt appears (see "Default
Credentials" above ).
You will obtain a video output like the following:
root
Password:
root@productname...:~#
67 / 102