Eurotech BoltGATE 20-25, Руководство пользователя

Страница: 93 / 102

BoltGATE 20-25 User Manual Rev. 1-1 13 How to Install the Product
13 H
OW TO
I
NSTALL THE
P
RODUCT
NOTICE
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only
(for example in a cabinet / technical compartment).
WARNING
THE PRODUCT CAN BE POWERED WITH A HAZARDOUS VOLTAGE.
CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN.
To avoid injuries, before installing the product:
1. Make sure that you have read carefully and understood the instructions
contained in the section "Safety Instructions" on page 9
2. Make sure that you have disconnected all power.
To install the BoltGATE 20-25, complete the following steps:
1. See the "Mechanical Specifications" on page 91
2. Use the M5 holes and slots available on the Mounting Brackets
3. According to your installation requirements, firmly fasten the product in place, adding all the
necessary locking parts (for example, screws and washers, that are not provided) and applying the
required tightening torque.
In case of uncertainties contact the Eurotech Technical Support Team. For more information see "How to
Receive Technical Assistance" on page 13 .
93 / 102