Euronda Euroseal, Инструкция по эксплуатации

Страница: 11 / 23

Aquafilter
TheEuroseal_Ing_rev02 - 17/11/14
10
Euroseal
®
5) Insert one or two of the tubes* on the roll-
holder making sure that the tooth of the roll-
holder slots into the slit on the tube, if
necessary by turning the tube.
* according to the desired use.
(see paragraph 3.2)
6) Insert the work surface by inserting the 3
teeth into the relevant holes on the sealing
& cutting station
(1) and lower the surface
so that it blocks onto the ledge (2) .
7) Insert the mains wire.
The device is ready for use.
NOTE : The thermosealing device has been tested and calibrated in the factory.
Roll-holder tube
Work surface
1
2
Plug for the mains wire
Mains wire