Euronda Euroseal, Инструкция по эксплуатации

Страница: 14 / 23

Aquafilter
TheEuroseal_Ing_rev02 - 17/11/14
13
Euroseal
®
For
wall-mounting the roll-holder, follow the instructions below.
1) Fix two dowel screws of diameter 6 (screw head:
max. diameter 9,5 mm, main part of screw: max
diameter of 5 mm) with a wheel base of 213 mm.
Leave a protrusion of 13mm between the screw
head and the wall so that the roll-holder can be
mounted.
Use dowel screws that are suitable for the type of wall (cement, brick, plasterboard etc.)
2) Attaching the roll-holder to the dowel-screws in
the wall.
Place the holes in the roll-holder onto the dowel-
screw heads
(1) and pull downwards (2) to hold
it in place.
3) Insert the tube with the rolls (see 3.1 – Installation).
ATTENTION:
Insert the tube on the roll-holder making sure that the tooth of the roll holder slots into the slit on
the tube, turning the tube if necessary.
WARNING:
When the roll-holder is wall-mounted, it is suggested to use it fully lowered with only one tube
(see 3.2).
If the roll-holder is used fully extended with two tubes, place the lighter rolls on the outermost
tube. Load a maximum of 2 kg.
1
2