Euronda Euroseal, Инструкция по эксплуатации

Страница: 10 / 23

Aquafilter
TheEuroseal_Ing_rev02 - 17/11/14
9
Euroseal
®
CHAPTER 2
2.1 - INSTALLATION
Install the product respecting the following warnings:
•
Position the thermosealing device on a flat surface with sufficient working space around it.
•
Do not install the machine next to sinks or anything similar in order to avoid contact with water and the
short circuit of the electrical system.
•
Avoid proximity to sources of heat.
•
Install the machine in an area with normal ventilation.
•
Make sure that the mains wire is not bent and that it is free of obstruction up to the electric socket.
1) Remove the sealing/cutting station and the roll-holder with care from the packaging.
2) Insert the roll-holder into the sealing &
cutting station by sliding it along the steel
guides.
3) Push the roll-holder as far as it will go in
order to take up as little space as possible
or the distance can be adjusted according
to ones needs.
4) Tighten the two screws (1 and 2) with the
supplied allen key until they are fully
tightened.
Sealing & Cutting station
Roll-holder
Allen key
1
2