Installation Manual Dust Free Industrial 8500
3
1
PREFACE
Only install the DFI (Dust Free Industrial) if it complies to local/national
legislation, regulation and standards.
The DFi is intended to be used as particle filter in light industrial and dry
environments.
The DFI is exclusively suitable to be connected to an earthed power outlet
with a supply voltage of 230V~ / 50/60Hz.
Pictograms and symbols
The following pictograms and symbols are used in this manual and on the
product.
WARNING
Risk of electric shock.
CAUTION
After switching off the motor, wait for the fan to stop before
removing the filters.
Tips and advice for carrying out the work or activity
more easily.
WARNING
Procedures which, if not carried out with the necessary caution,
can result in serious damage to the product or personal injury.
WARNING
Fire hazard! Never use the product for the extraction of
inflammable, glowing or burning particles, substances or
liquids. Never use the product for the extraction and/or
filtration of aggressive vapours (such as hydrochloric acid) or
sharp particles.
Service and maintenance
For information on specific settings and maintenance or repair work falling
outside the scope of this manual, please contact the supplier of the product.
Please ensure that you have the following data available: product name and
serial number.
These data can be found on the identification plate.
2
INSTALLATION MANUAL
This installation manual is meant to be used by sufficient educated and
skilled professionals with experience in installing electrical devices and
mechanical installations.
Attempts to install the DFI in a different way than described in this
installation manual or make alterations may lead to physical injuries and
material damage.
Euromate is not responsible for interpretation of this information and can’t
be held liable for ineffective use of this information
•
Read this information carefully before installing the DFI.
•
This document need to be seen in conjunction with the DFI manual.
•
A damaged power supply cord may only be replaced by
authorized staff.
•
Installation activities need to comply with local/national legislation and
European wiring norm and may only be performed by authorized staff.
The warranty is invalid incase the damage is originating from
proceedings that deviate from this installation manual or neglect.
•
Always wear the appropriate personal protection like safety goggles,
inhalation protection, ear protection, gloves etc.
Internet
You can download the most recent version of this installation manual and
other related manuals from our extranet. Request your login-details:
[email protected].
3
CONTENTS
1.
Safety regulations
2.
Installation of the DFI
3.
Electrical installation
4.
Setting up Electronics
5.
Test run
WARNING
Install, remove and/or re-install the DFI not by yourself if you do
not have the required electrical and or mechanical experience
nor authorization.
WARNING
Inexpert installation can lead to electrical shocks or mechanical
damage to people and environment.
ATTENTION!
Malfunctions caused by an inexpert installation are not
warranted.
The DFI need to be installed at an easy accessible location. All
additional costs for renting specialist equipment for
maintenance are for the customer.
4
SAFETY REGULATIONS
Always mind the following safety precautions:
•
Read the safety precautions before installing the DFI
•
Mind the mentioned precautions because they contain important
information with relation to safety
•
After reading keep this instruction at a safe place together with the
user manual for easy consultation of these documents
The DFI needs regular maintenance. The efficiency will go down and power
consumption will go up over time.
WARNING
:
Do not install the DFI yourself!
Incorrect installation can lead to electrical shocks or falling
which can lead to injuries and damage. Consult the dealer or
distributor from where the DFI was bought.
WARNING
:
Install the DFI at a safe location that can hold the weight of
the DFI
Installation at a location that is not strong enough may cause a
falling device.
WARNING
:
Use the prescribed cables for safe connections
Incorrect connections can lead to fire.
WARNING
:
Use the prescribed parts for installations
Incorrect installation can lead to physical harm due to fire,
electrical shocks or falling device.
WARNING
:
Activities related to the electrical system should always
be performed in consensus with this manual and use a
closed circuit.
A supply circuit with insufficient power or an incomplete
installation can lead to fire or electrical shocks.
WARNING
:
Firmly install the cover on the DFI.
Incorrect installation of the cover can lead to fire or electrical
shocks due to dust, moisture etc.
