Euromate 482274, Оригинальное руководство пользователя

Страница: 38 / 144

GB
38
Mounting: Putting the air filter into the inlet grille,
replace the components as they were.
Clean the Air-conditioner Surface
First clean the surface with a neutral detergent and
wet cloth, and then wipe it with a dry cloth. Solving problems
What to do when something no longer works …
Faulty functions are often caused by small errors. You
will be able to deal with many of these yourself. Pay
attention to the following table before you contact
OBI. This may save you unnecessary trouble and
possibly also costs.
If you are unable to eliminate the error yourself,
please contact your closest OBI market. Please note
that unprofessional repairs will void your guarantee
and may lead to additional costs above and beyond
the guarantee.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and battery packs in all sys-
tems must only be retuned to a collection point when
discharged. Batteries must always be protected
against short circuits by covering the poles with adhe-
sive tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
DANGER! Risk to life! Unprofessionally
carried out repairs may mean that the prod-
uct will no longer operate safely. This is a
risk for you and your environment.
Error/Faulty function Cause Remedy
Unit does not start when pressing
on/off button Water full indicator lamp blinks, and
water tray is full. Dump the water out of the water
tray.
Room temperature is higher than
the setting temperature. (Electric
heating mode) Reset the temperature
Room temperature is lower than the
setting temperature. (Cooling mode)
Not cool enough The doors or windows are not
closed. Make sure all the windows and
doors are closed.
There are heat sources inside the
room. Remove the heat sources if possible
Exhaust air hose is not connected or
blocked. Connect or clean the exhaust air
hose.
Temperature setting is too high. Reset the temperature
Air inlet is blocked. Clean the air inlet.
Noisy The ground is not level or not flat
enough Place the unit on a flat, level ground
if possible
The sound comes from the flowing
of the refrigerant inside the air con-
ditioner It is normal.
[E0] Code Room temperature sensor failed Replace room temperature sensor
(the unit can also work without re-
placement.)
[E1] Code Condenser temperature sensor
failed Replace condenser temperature
sensor
[E2] Code Water tray full when cooling Take off rubber stopper and empty
the water.
[E3] Code Evaporator temperature sensor
failed Replace evaporator temperature
sensor
[E4] Code Water tray full when heating Please empty the water tray.