Euromag EUROSONIC 2000 HH, Руководство пользователя

Страница: 30 / 80

30 | EUROMAG
EUROSONIC 2000 HH
Menu window No.
M20
M21
M22
M23
M24
M25
M26
M27
M28
M29
M30
M31
M32
M33
Function
Window for selecting fluid type
For standard liquids (no need to enter liquid sound speed) include:
0) Water
1) Sea Water 2) Kerosene 3) Gasoline
4) Fuel oil 5) Crude Oil 6) Propane at -45C 7) Butane at 0C
8)Other liquids 9) Diesel Oil 10)Caster Oil 11)Peanut Oil
12) #90 Gasoline 13) #93 Gasoline 14) Alcohol
15) Hot water at 125C
Window for entering the sound speed of non-standard liquids
Window for entering the viscosity of non-standard liquids
Window for selecting transducer type
There are 14 different types of transducers for selection.
If the π type spool-piece transducers are used, the user needs to configure the 3 transducer
parameters.
Otherwise, the user needs to configure the 4 transducer parameters.
Window for selecting the transducer mounting methods
Four methods can be selected:
0) V-method
1) Z-method 2) N-method 3) W-method
Display the transducer mounting spacing or distance
Entry to store the pipe parameters into the internal NVRAM (non-volatile memory)
Entry to read the previously saved pipe parameters
Entry to determine whether or not to keep the last correct value when poor signal condition
occurs. YES is the factory default
Window to set the threshold below which the receiving signal is defined as poor. Valid
number: from 000 to 999. 0 is the factory default
Window for selecting unit system. ‘Metric’ is the factory default. The conversion from
English to Metric or vice versa will not affect the unit for totalizers.
Window for selecting flow rate unit system.
Flow rate can be in
0. Cubic meter short for (m
3 ) 1. Liter (l)
2. USA gallon (gal) 3. Imperial Gallon (igl)
4. Million USA gallon (mgl) 5. Cubic feet (cf)
6. USA liquid barrel (bal) 7. Imperial liquid barrel (ib)
8. Oil barrel (ob)
The flow unit in terms of time can be per day, per hour, per minute or per second. So there
are 36 different flow rate units in total for selection.
Window for selecting the totalizers’ unit
Window for setting the totalizer multiplying factor
The multiplying factor ranges from 0.001 to 10000