26
The day indicator will now flash (SUN). Choose the days when the stove must
operate (e.g., from Monday to Friday) by pr next to the days you have
selected and pressing - next to the days that you don't want to select. Use to
arrows to move to the next day. Press again on the TIMER SET button to choose
the days and confirm.
The hours indication will now flash and you will see ON on the display. By
selecting the + and - buttons, you choose the hours when you want the stove to
operate. Confirm by pressing the TIMER SET button.
The minutes indicator will now flash. By pressing the + and - buttons, you select
the time period (in intervals of 10 minutes) for the stove to operate. Confirm by
pressing on the DAY/TIME button. The starting time is now set.
The hour indicator is flashing again to order for you to set at which time the
operation must end. OFF appears on the display. Select the time in the same way
you selected the operating time and confirm by using the TIMER SET button.
Now the temperature setting starts to flash. Using the + or - buttons, select the
desired temperature and confirm by using the TIMER SET button.
You initial timer setting is now set.
To generate a second setting, press once again on the TIMER SET button. While
01 is flashing, press on the + button: 02 will appear. Confirm this using the TIMER
SET button and subsequently set new days, hours and minutes as described
above.
You can generate maximum 10 time settings. Prevent the setting from containing
any conflicting or overlapping orders.
To operate the stove according to the timer settings, do the following:
Switch on the stove using the ON/OFF button.
Press the 1000W or 2000W button to set the desired output. If the desired
temperature is above the ambient temperature, the stove will begin to heat.
Do
not use the IC button when you use the timer!
The corresponding light will light
up on the display: 1 star or 2 stars.
By pressing the ‘dimmer’ button (there are 5 positions), you can intensity or
decrease the flame effect of the stove.
Now activate the timer by pressing on the TIMER ON/OFF button. The operating-
timer light will light up and the timer set 01 will flash. If you press OK now, then the
heater will completely process all the settings once until Sunday evening 24:00. If
you want to repeat the set weekly schedule, press once again on the TIMER
ON/OFF button. A symbol ][ will appear on the display. If you now press OK, the
timer setting will be repeated weekly.
If you don’t select a time setting, then the stove will automatically select setting 01
after flashing approx. 14 times and the heater will completely process all the
settings once until Sunday evening 24:00.
Attention!
All timer settings (maximum 10 per week) will be processed completely
one by one. Therefore, make sure that they do not contradict each other!
If you wish, you can also readjust the thermostat, output and dimmer while the
timer is working.
