25
Remote control:
Press on the ON/OFF button to switch on the stove.
Now set the desired temperature. The temperature & timer setting will usually show the
ambient temperature. By pressing on the + or - button, you see the set temperature
flashing for a short time and by pressing the + or - buttons, you can adjust the
temperature (from 15 to 30°C). After a few seconds, the display switches back to the
ambient temperature and the newly desired temperature is set. The temperature is
standard set to 20°C.
Now you can start operating the stove by pressing the button to 1000W (half output) or
2000W (full output). When the set temperature is above the ambient temperature, the
stove will start to heat. If you press the IC button, the stove will automatically choose
the most suitable output: up to 6° temperature difference = half output; more than 6°
temperature difference = full output. The corresponding lights on the display are turned
on (1 star, 2 stars or AUTO).
The thermostat will switch off the stove as soon as the stove reaches the desired
temperature and it will switch it on again if the ambient temperature drops.
By pressing the ‘dimmer’ button (there are 5 positions), you can intensity or decrease
the flame effect of the stove.
You switch off the stove by pressing the ON/OFF button. The temperature level that
you set will remain. However, if you switch on the stove once again, you will have to
reset the output.
If you want to switch off the stove for a longer period, then also set the main switch on
O (OFF). The set temperature will now be erased. Finally remove the plug from the
socket.
TIMER
The stove has a built-in weekly timer, which allows you to set a weekly schedule for
switching on and off.
You must first set the date and time
; if you don't do that, then
the stove assumes that it is scheduled for Sunday at 00.00!
Press the ON/OFF button to switch on the stove.
Press on the DAY/TIME button; the day indicator will light up.
Select the arrows Λ
and V for the current day and confirm this by pressing the DAY/TIME button again
(Sunday, Monday, etc.)
The hour indication will now flash. By pressing on the + and - buttons, you select
the current hour. Reconfirm by pressing on the DAY/TIME button.
The minutes indicator will now flash. By pressing on the + and - buttons, you select
the precise time. Confirm by pressing on the DAY/TIME button.
Day and time are now set.
To set the weekly timer, take the following steps:
Ensure that the stove is switched on with the ON/OFF button.
Press on the TIMER SET button. The indication 01 on the display starts to flash,
indicating that you have selected the first timer setting (you can select 10 timer
settings). Confirm this by pressing once again on the TIMER SET button.
